Dhollandia DH-AI02.04.01, Installation Manual

Page: 25 / 45

24
DHOLLANDIA
8.4.5 Additional installation kits DH-AI

Dhollandia offers additional installation kits in case certain circumstances don’t allow the installation to follow the standard
procedure:
-
Standard location for floor perforations coincide with chassis beams or other structural elements of the chassis.

OAM801.CFG: 1001
This installation kit should make the installation possible in most situations. It is positioned under the ramp frame and offers
additional fixation points. The kit includes two times the assembly that is shown below, for both sides of the ramp.
A: The base plate provides two additional fixation opportunities. As these are located underneath the ramp frame, the plates
need to be adapted for the use of an Allen bolt with a countersunk head.
B: It is recommended to fixate the base plate also on the other side of the standard fixation plate as shown on the picture.
1 Bolt M10x16 BT10.016
2 Spring washer M10 BC10.2
3 Included in standard mounting set
4 Spacer plate
MQ0603.F.B02
5 Allen Bolt with countersunk head BI10.080.7991.FT
6 Large washer M10
BC10.3
7 Locking nut M10 BMB10
8 Base plate MQ0603.F.B01
A
B
1
2
3
4
8
5
6
7