DHD Power Cruiser 52/XR Manual Download Page 34 | Manualshive

Page: 34 / 60

background image

Version 1.14.0 - 14.04.2010

31

Configuration and Operation of an 52/XR MADI Router

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

The Connection Dialog of the Toolbox5.

If an 52/XR MADI Router is available but unreachable via network, you probably need to refine the network settings.
Please refer to the section Connecting the Device to a PC to learn more about the network configuration of an 52/XR MADI
Router.

7.2

Operation with DHDOS and DHDOM

During its operation, the 52/XR MADI Router is controlled by the DHD Operation Server (DHDOS) and the user interface
software DHD Operation Manager (DHDOM).

The DHDOS acts in the background and administrates the actual control of the crosspoints.

The DHDOM is a comfortable user interface to set the crosspoint states of an 52/XR MADI Router directly or scheduled.
The software also offers a lot of additional options like user accounts and the adjustment of the software user interface
concerning the rights and needs of each single user. Moreover, other applications intended for the use with 52/MX Mixing
Consoles are included in this software (DSP Control Software, Remote Control, Snapshot Manager).

Note

Please find a comprehensive description of the DHDOS and the DHDOM and
there functions in the DHDOS & DHDOM manuals. The

DHDOS/DHDOM -

Routing, Scheduling and Monitoring Software Manual

includes the

information concerning the routing applications.

Note

Please note, at least one

52-8550 Routing/Scheduling Software

or

52-

8551 Routing Software

license is needed to be able to control the 52-6720

TOM module with the DHD Operation Manager. Without one of these licenses it
is not possible to route signals to the outputs of the module and to control the
options of the module (level etc.)!

More information on the TOM module and its use can be found in the

DHDOS/

DHDOM - Routing, Scheduling and Monitoring Software Manual

.

«
...
32
33
34
35
36
...
»

Summary of Contents for 52/XR





























































Reviews:

No comments

Related manuals for 52/XR

Brand: Lorex Pages: 186

Brand: Xenya Pages: 189

Brand: B+B SmartWorx Pages: 52

Brand: CyberTAN Pages: 67

Brand: XtendLan Pages: 52

Elinx EIR508 Series

Brand: B&B Electronics Pages: 2

Brand: Symantec Pages: 100

Husky HMG-1648EP

Brand: Ethernet Direct Pages: 16

Brand: Alcatel Pages: 4

Q-SYS QIO-GP8x8

Brand: QSC Pages: 13

Brand: TRENDnet Pages: 205

Brand: Intellinet Pages: 32

Brand: Accusys Pages: 12

Brand: Billion Pages: 2

Brand: Trane Pages: 8

Brand: Datacom Pages: 118

Brand: Billion Pages: 168

Brand: Westermo Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands