5. GFS TOOLS SOFTWARE
Page 145
© 2007 DH Instruments, a Fluke Company
Verify the communications setting and load the DUT information on the “
Configure
Device
” window (see Figure 100). Verify the DUT information and select “
Next
”. Repeat
for additional DUT(s).
Figure 100:
Run Test - Configure DUT Device window
Verify or select the mass flow controller on the “
Setup Flow Controller
” window (see
Figure 101). This selection is predefined in the test but can be changed at this step to
another flow controller, i.e. manual control. Select “
Next
”.
Figure 101:
Run Test - Setup Flow Controller window