GFS2102™ OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company
Page 114
5.5.3.1
[HEADER] TAB
The information on this tab should be used to easily identify a GFS
DUT
Definition.
Selections made on the
[Header]
tab can change the options on the remaining
tabs of an Editor. For example, selecting
<Autodetect Setup>
hides the
[Output]
tab when a DH Instruments DUT is defined.
Do not use the following characters in any of the [Header] fields: \,/, :, *, ?, “,
<,>, |, a comma or tab character. These characters will cause problems when
importing the Data File or creating the Data File directory based on the data
directory naming convention (see 5.4).
Figure 72.
DUT Editor, [Header] Tab
Table 45.
DUT Editor, [Header] Tab Fields
FEATURE
DESCRIPTION
Device Type
(required drop
down list
selection;
DUT Editor only)
Determines if the DUT is also available for use as a flow controller. There are two choices:
DUT Flow
The DUT is used for flow measurement only.
DUT Controller
The DUT is available for flow measurement and can be selected as a
flow controller during Test Initialization.