GFS2102™ OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company
Page 102
5.5
[SETUP] MENU
5.5.1
OVERVIEW
The
[Setup]
menu contains features to manage Test Definitions, Devices Under Test
(DUTs), Support Devices, system configuration and GFS calibration. Shortcuts to the editors
in this menu are also available on the main toolbar (see 5.1.4.2, Run Display Tools).
The editors found in the
[Setup]
menu have many common functions. Sections 5.5.1.1 to
5.5.1.2 detail the common sections. Sections 5.5.2 to 5.5.7 describe the selections in the
[Setup]
menu.
5.5.1.1
SETUP SELECTOR
The Setup Selector is used throughout
GFS Tools
to select Test Definitions,
DUTs, and Support Devices. The Editor Toolbar on all
GFS Tools
editors
provides a link to the
Setup Selector
. This allows a setup to be identified quickly
from a list rather than by scrolling through all individual setups.
In the Setup Selector, all setups are listed alphabetically by
<Label>
. The
selector columns include information that should allow easy identification of a
specific setup. Click the desired selection and press
[OK]
or double click the
field to make a selection.
Figure 64.
Setup Selector
5.5.1.2
EDITOR TOOLBAR
All editors in
GFS Tools
use the Editor Toolbar. This includes the DUT, Support
Device and Test Definition Editors. In the editor, all features not on the tabs are
considered part of the
Editor Toolbar
. The toolbar identifies the definition that is
active in the editor, provides tools to create, delete, save, restore and select a
definition to edit.
Use the scrollbar or the
[Select from List]
toolbar icon to pick a setup to edit. A
label flashes “Editing” when any changes to an existing setup are made or a new
setup is created. Use the
[Restore]
toolbar icon to undo undesired changes.