60
Imprinting
Mounting the Material
1.
Attach the head cap.
A
Make sure that preparations for imprinting are completed.
"
P.40 "Preparing for Imprinting"
B
If the head unit is lowered, press the Power/Movement button.
The head moves to the left rear.
C
Loosen the head's stopper.
Rotate the knob once. The stopper and ring come into contact with each other.
Ring
Stopper
Loosen
D
Fix the head's stopper.
Align the center of the knob with the top of the triangle directly below and then secure the stop-
per. If you perform imprinting while the stopper is loose, the knob might come off due to vibration.
Knob
Tighten
The center of the knob must
be positioned immediately
above the top of the triangle.
2
Imprinting
