Specifications
81
3. Appendix
Specifications
DWX-42W
Millable material*
Glass ceramics, composite resins
Pin type
Width × depth × height: max. 40 × 20 × 20 mm
(1.5 × 0.8 × 0.8 in.)
Operating speed
XYZ: 6 to 1800 mm/min (0.24 to 70.9 in./min.)
Spindle speed
15,000 to 60,000 rpm
Rotary axis travel angle
A: ±360°
Number of milling burs
housed
6
Attachable milling bur
Shank diameter: 3 mm, dedicated milling bur
Compatible compressed air
0.18 to 0.22 MPa
Interface
USB
Ethernet (10 BASE-T/100 BASE-TX automatic switching)
Control command sets
RML-1, NC code
Power requirements
AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category: II, IEC 60664-
1), 2.1A
Power consumption
Approx. 190 W
Operating noise
During operation: 70 db (A) or less (when not cutting)
During standby: 48 dB (A) or less
External Dimensions
Width × depth × height: 482 × 560 × 600 mm (19.0 × 22.0 × 23.6 in.)
Weight
61 kg (135 lb.)
Installation environment
Indoor use at altitudes up to 2000 m
Temperature: 5 to 28°C (41 to 82°F)
Humidity: 35 to 80%RH (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage: 1440 V
Long-term temporary overvoltage: 490 V
Included items
Power cord, USB cable, manuals, software CD, automatic correction jig,
milling burs, hexagonal screwdriver, etc.
* Even when made from the described materials, some workpieces cannot be milled due to
specifications or physical properties. For more information, contact your authorized Roland DG
Corporation dealer.
