Page 24 of 53
8000-INS-UMENG Rev. 4
15.6
Adjusting Image Controls
The three
Gain
Controls
allow you to adjust
the near, middle or far field gain of the
displayed image. These sliders control gain in
the imaging software, not the probe itself.
Intensity
Control
adjusts
the
overall
intensity, or brightness, of the image.
Contrast Control
adjusts the overall contrast of the image. Adjust this control to
increase or decrease the amount of contrast between light and dark areas of the image
15.7
Saving Operator Settings
The current image control settings (Gain, Intensity, Contrast) can be saved
to the active operator by selecting the
Save Settings
button. Whenever the
operator is selected, the image controls will default to the saved settings.
15.8
Video Controls
Use the video controls to review the scan. When paused, use the slider bar to sweep
through the video manually, or use the keyboard arrow keys to move frame by frame.
