DFSK Seres 3 2019, User Manual, Page: 96 / 233

Instrument and Control Switch
- 95 -
The right front door, left rear door and
right rear door are equipped with
independent glass lifter switch. If you
touch the switch when you do not
touch the left front door glass lifter
locking switch, the glass will be lower,
and if you release it, the glass will stop
lowering; if you pull the switch
upwardly, the glass will raise, and if
you release it, the glass will stop
raising. When you press down the
front passenger door glass lifter switch,
other three glass lifters will not work.
After the lock switch is pressed, if the
auxiliary switch of power window is
working, it can continue working; if
the auxiliary switch of power window
is not working, but the auxiliary
switch can still be operated to control
the window lifting within 60s. The
auxiliary switch of power window
cannot keep controlling the window
lifting after 60s.
Windows Glass One-button
Operating
There are four modes for winder class
to start anti-pinch function:
Manual raising: if you pull the power
window switch for a moment, the
corresponding window glass will raise;
if you release it, it will stop raising;
Manual lowering: if you touch the
power window switch for a moment,
the corresponding window glass will
lower; if you release it, it will stop
lowering;
Automatic raising: if you pull the
power window switch for a long time,
the corresponding window glass will
raise automatically, and the window
glass will raise to the top
automatically;
Manual lowering: if you touch the
power window switch for a long time,
the corresponding window glass will
lower, and it will lower to the bottom.
Anti-pinch Function of
Windows
In case of any resistance in glass
window lifting, the anti-pinch function
will be activated.
If the anti-pinch function is activated
in case of any obstacles during glass
window lifting, the windows will
work reversely. Under some
circumstances, the anti-pinch function
system will be at non-initialization
mode, which causes the windows can
be lifted manually only and lose the
function of automatic lifting
temporarily, and they can be resumed
by self-learning function. The cases
that the system is at non-initialization
mode are as follows:
①
The glass lifter suffers from power
failure for 24s during operation;
②
The diagnostic apparatus turns off
the anti-pinch function;