DFSK Seres 3 2019, User Manual, Page: 206 / 233

Description of Charging and Discharging
- 205 -

For ease of use, the integrated
instrument will indicate the expected time
of full charge.
Charge Mode
This car is a pure electric car, using the
power provided by the battery to run. To
avoid being unable to use EV mode due to
power battery loss, it is very important to
timely charge and calculate the power
demand before driving.
Two Charging Methods for This
Car
I: AC
Household socket
1.
The charging equipment (three-core
to seven-core) is a charging device
equipped with the vehicle. It connects the
vehicle to the household standard 220V
50Hz 16A single-phase bipolar grounding
socket to charge the vehicle.
2.
The socket should be the special
charging socket, because the high-power
charging will lead to line damage and line
tripping protection, affecting the normal
use of other equipment.
Slow-charging pile
1.
The slow-charging pile connects the
vehicle to the standard 220V 50Hz 32A
single-phase bipolar grounding socket for
special domestic installations to charge the
vehicle.
2.
Generally, the slow-charging piles
are installed in private parking lot,
supermarket, shopping mall or parking lot
and other public places.
II: DC
Fast-charging pile
Generally, the fast-charging piles are
installed
in private parking lot,
supermarket, shopping mall or parking lot
and other public places.
Charge Method
Introduction to Charging
When the power bar in the power display
area reaches the red warning box, it is
recommended to charge in time.
Note
It is recommended to charge in time when
the battery reaches the warning red box, so
as to ensure that EV mode will not be
unable to be used due to insufficient
battery. Meanwhile, instant charging is
good to the battery; and it is not
recommended to charge after the battery
runs out.
Inspection before Charging

Make sure the charging equipment is
not scratched, rusted or cracked or the
surface of the charging port, cable, control