DFSK Seres 3 2019, User Manual, Page: 171 / 233

Maintenance and What You Can Do
- 170 -
a lot of fresh water.
●
Place the motor coolant at the place
inaccessible to children.
Properly process the motor coolant. Refer
to the local laws and regulations.
Brake
Inspection of Brake Pedal
Warning
If the brake pedal is too high to back to the
normal position, please consult the service
stations authorized by DFSK and ask for
inspecting brake system.
When the vehicle is powered on, please
check the distance from the lowest point
and floor○A.
○A: more than 35mm when the pressure of
pedal surface is of 500N.
The stroke of brake pedal shall conform to
the range shown in the table below.
Parameter of brake pedal stroke
Operating
condition
Idle
stoke
(mm)
Operating
stoke (mm)
Stroke
limit (mm)
Normal
operating
status
5
～
8.3 57.9
～
62.9
120
Invalid
operating
status
52.2
～
59.5
82.5
～
89.8
120
If such distance is outside the following
range, please consult the DFSK franchise
store.
Self-adjustable Brake
Your car is equipped with a self-adjustable
brake. The brake will adjust automatically
when the brake pedal is stepped down.
Vacuum Booster
Check the function of vacuum booster as
per the following steps:
1
．
Turn off the vehicle, step down brake
pedal for several times to ensure the stroke
of brake pedal will be remained.
2
．
Step down the brake pedal and start
the vehicle. The height of pedal shall be
lower slightly.
3
．
Step on the brake pedal, and turn off
the vehicle power supply. Step down pedal
for about 30s, and keep the pedal height
remained.
4
．
Turn on the power supply of the