manualshive.com logo in svg

DFI SU171, User Manual, Page: 77 / 79

Share
Download
DFI SU171 User Manual Download Page 77

www.dfi .com

77

Chapter 6 Intel AMT Settings

Chapter 6

40.   In the Intel(R) AMT Power Control menu, select Idle Timeout then press Enter. 

Enter the timeout value (1-65535).

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

INTEL (R) AMT POWER CONTROL

This confi gurations are effective only after AMT provisioning has started

Intel (R) ME ON in Host Sleep States         

    <Mobile: ON in S0,

                                                                  ME Wake in S3, S4-5
                                                                  (AC only)> 

 

Idle Timeout                                                

65535

                        <ENTER> = Complete Entry     [ESC]= Discard Changes

Timeout Value (1-65535)

41.   Select Previous Menu until you return to the Main Menu. Select Exit then press Enter. 

Type Y then press Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

MAIN MENU

> Intel (R) ME General Settings
> Intel (R) AMT Confi guration

MEBx Exit

         Exit

[



] = Move Highlight     [Enter] = Select Entry           [Esc]= Exit

 65535

Summary of Contents for SU171
















































































Reviews:

No comments