DFI SU171 User Manual Download Page 75

Page: 75 / 79

www.dfi .com

Chapter 6 Intel AMT Settings

Chapter 6

32. In the Intel(R) Remote Setup And Configuration menu, select Provisioning server

FQDN, enter the FQDN of Provisioning server then press Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

INTEL (R) REMOTE SETUP AND CONFIGURATION

[ESC] = Exit

Current Provisioning Mode
Provisioning Record

Provisioning Server IPV4/IPV6 _
Provisioning Server FQDN

> RCFG
> TLS PKI

[



] = Move Highlight [Enter] = Select Entry [Esc]= Exit

Enter FQDN of provisioning server

33. In the Intel(R) Remote Setup And Configuration menu, select RCFG then press

Enter, and select Start Configuration then press enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

INTEL (R) REMOTE CONFIGURATION

[ESC] = Exit

Start Confi guration

[



] = Move Highlight [Enter] = Select Entry [Esc]= Exit

34. In the Intel(R) Remote Setup And Configuration menu, select TLS PKI then press

Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

INTEL (R) REMOTE SETUP AND CONFIGURATION

[ESC] = Exit

Current Provisioning Mode
Provisioning Record

Provisioning Server IPV4/IPV6 _

Provisioning Server FQDN _

> RCFG

TLS PKI

[



] = Move Highlight [Enter] = Select Entry [Esc]= Exit

35. In the Intel(R) Remote Configuration menu, select Remote Configuration**

then press Enter, select Enabled or Disabled then press Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

INTEL (R) REMOTE CONFIGURATION

[ESC] = Exit

Remote Confi guration**

< Enabled>

PKI DNS Suffi x

> Manage Hashes

[



] = Move Highlight [Enter] = Select Entry [Esc]= Exit

Disabled
Enabled

Summary of Contents for SU171
















































































Search results

Summary of Contents for SU171

Reviews:

DFI SU171, User Manual, Page: 75 / 79

Search results

Summary of Contents for SU171

Reviews: