manualshive.com logo in svg

DFI SU171, User Manual, Page: 71 / 79

Share
Download
DFI SU171 User Manual Download Page 71

www.dfi .com

71

Chapter 6 Intel AMT Settings

Chapter 6

16.   In the User Consent menu, select Opt-in Configurable from Remote IT then press 

Enter. Select Enabled or Disable Remote Control of KVM Opt-in Policy then press 

Enter. 

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

USER CONSENT

   User Opt-in                                                  

< KVM>

 

  

   Opt-in Confi gurable from Remote IT

                

< Enabled>

    

            

Disabled
Enabled

17.   Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select 

Password Policy then press Enter.

 

 

You may choose to use a password only during setup and configuration or to use a pass-

word anytime the system is being accessed.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

   Manageability Feature Selection                   

< Enabled> 

  

> SOL/Storage Redirection/KVM       
> User Consent

 

   Password Policy                                        

<Anytime>

> Network Setup
   Activate Network Access
   Unconfi gure Network Access                      <Full Unprovision>
> Remote Setup And Confi guration
> Power Control                 

INTEL (R) AMT CONFIGURATION

Default Password Only
During Step And Confi guration
Anytime

[



] = Move Highlight   [Enter] = Complete Entry  [Esc]= Discard Changes

[



] = Move Highlight   [Enter] = Complete Entry  [Esc]= Discard Changes

18.   In the Intel(R) AMT Configuration menu, select Network Setup then press Enter. 

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

[



] = Move Highlight     [Enter] = Select Entry           [Esc]= Exit

   Manageability Feature Selection                   

< Enabled> 

  

> SOL/Storage Redirection/KVM         
> User Consent

 

   Password Policy                                        <Anytime>

> Network Setup

 

   Activate Network Access
   Unconfi gure Network Access                      <Full Unprovision>
> Remote Setup And Confi guration
> Power Control                 

INTEL (R) AMT CONFIGURATION

19.   In the Intel(R) ME Network Setup menu, select Intel(R) ME Network Name Set-

tings then press Enter. 

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

[



] = Move Highlight     [Enter] = Select Entry           [Esc]= Exit

INTEL (R) ME NETWORK SETUP

   

> Intel (R) ME Network Name Settings  

 

   > TCP/ IP Settings           

Summary of Contents for SU171
















































































Reviews:

No comments