DFI SU171 User Manual Download Page 70

Page: 70 / 79

www.dfi .com

Chapter 6 Intel AMT Settings

Chapter 6

12. In the SOL/Storage Redirection/KVM menu, select Storage Redirection then press

Enter. Select Enabled or Disabled then press Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

SOL/Storage Redirection/KVM

Username and password < Enabled>

SOL

Storage Redirection

KVM Feature Selection <Enabled>

Disabled
Enabled

13. In the SOL/IDER/KVM menu, select KVM Feature Selection then press Enter. Select

Enabled or Disabled then press Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

SOL/Storage Redirection/KVM

Username and password < Enabled>

SOL

Storage Redirection

KVM Feature Selection

Disabled
Enabled

[



] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes

[



] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes

14. Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select

User Consent then press Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

[



] = Move Highlight [Enter] = Select Entry [Esc]= Exit

USER CONSENT

User Opt-in

< KVM>

Opt-in Confi gurable from Remote IT

< Enabled>

Confi gure When User Consent Should be Required.

15. In the User Consent menu, select User Opt-in then press Enter. Select None or KVM

or ALL then press Enter.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

USER CONSENT

User Opt-in

< KVM>

Opt-in Confi gurable from Remote IT

< Enabled>

NONE
KVM
ALL

[



] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes

Summary of Contents for SU171
















































































Search results

Summary of Contents for SU171

Reviews:

DFI SU171, User Manual, Page: 70 / 79

Search results

Summary of Contents for SU171

Reviews: