manualshive.com logo in svg

DFI SU171, User Manual, Page: 69 / 79

Share
Download
DFI SU171 User Manual Download Page 69

www.dfi .com

69

Chapter 6 Intel AMT Settings

Chapter 6

8.  In the Intel(R) AMT Configuration menu, select Manageability Feature Selection 

then press Enter. Select  Enabled or Disabled then press Enter. 

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

   Manageability Feature Selection                   

< Enabled>   

> SOL/Storage Redirection/KVM        
> User Consent

 

   Password Policy                                        <Anytime>
> Network Setup
   Activate Network Access 
   Unconfi gure Network Access                      <Full Unprovision>
> Remote Setup And Confi guration
> Power Control                 

Disabled
Enabled

9.  In the Intel(R) AMT Configuration menu, select SOL/Storage Redirection/KVM 

then press Enter. 

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

 SOL/Storage Redirection/KVM 

   Username and Password                             

< Enabled>   

   SOL                                                        <Enabled>
   Storage Redirection                                   <Enabled>
   KVM Feature Selection                              <Enabled>
 

        Menu for FW Redirection Confi guration

INTEL (R) AMT CONFIGURATION

10.   In the SOL/Storage Redirection/KVM menu, select Username and Password then 

press Enter. Select Enabled or Disabled then press Enter. 

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved..

SOL/Storage Redirection/KVM 

   Username and Password                             

< Enabled>   

   SOL                                                        <Enabled>
   Storage Redirection                                   <Enabled>
   KVM Feature Selection                              <Enabled>

  

Disabled
Enabled

11.   In the SOL/Storage Redirection/KVM menu, select SOL then press Enter. Select 

Enabled or Disabled then press Enter. 

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1180

Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.

SOL/Storage Redirection/KVM 

   Username and password                             < Enabled> 

  

   SOL                                                        

<Enabled>

   Storage Redirection                                   <Enabled>
   KVM Feature Selection                              <Enabled>

       

Disabled
Enabled

[



] = Move Highlight     [Enter] = Select Entry           [Esc]= Exit

[



] = Move Highlight   [Enter] = Complete Entry  [Esc]= Discard Changes

[



] = Move Highlight   [Enter] = Complete Entry  [Esc]= Discard Changes

[



] = Move Highlight   [Enter] = Complete Entry  [Esc]= Discard Changes

Summary of Contents for SU171
















































































Reviews:

No comments