DFI SU171, User Manual, Page: 39 / 79

www.dfi .com
39
Chapter 3 BIOS Setup
Chapter 3
WDT
Enable or disable the watchdog function. A counter will appear if you select to enable
WDT. Input any value between 1 to 255.
Case Open
Enable or disable the case open detection function.
AC Power Loss
Set the AC power loss always off/on.
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
WDT
Counter
Case Open
AC Power Loss
 PC Health Status
Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →

Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
[30]
[40]
[50]
[75]
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<RS232>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Enabled>
<SECOND>
[38]
<Disable>
<Always off>
↑
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss
 PC Health Status
Advanced
F1 Help ↑ / ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← / →  Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
[30]
[40]
[50]
[75]
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<RS232>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Disable>
<Disable>
<Always off>
COM Port 1 to COM Port 4
Configure the settings to use the serial port.
Disable No configuration
Enable User confi guration
Type
Choose RS232/RS485/RS422 (Peer-to-Peer) for the serial port type for COM port 1 and
COM port 2.
Confi gure Serial port using
options: [Disable] No Con-
figuration [Enable] User
Confi guration
↑