manualshive.com logo in svg

DFI SU171, User Manual, Page: 37 / 79

Share
Download
DFI SU171 User Manual Download Page 37

www.dfi .com

37

Chapter 3 BIOS Setup

Chapter 3

ME Configuration

This section configures settings relevant to flash ME region.

Enable/disable to fl ash  ME 
region

Me Fw Image Re-Flash

Advanced

F1   

Help             

  

↑

/

↓

    

Select Item                  

F5/F6 

Change Values                 

F9   

Setup Defaults

Esc  

Exit             

 

←

/

→

  

Select Item                  

Enter 

Select 

 SubMenu             

F10 

Save and Exit

InsydeH20 Setup Utility

Rev. 5.0

<Disabled>

Me Fw Image Re-Flash

This field is used to enable or disable the flash ME region.

Active Management Technology Support 

The section allows users to enable or disable the Intel

®

 Active Management Technology (Intel

®

 

AMT) BIOS extension. Refer to chapter 6 for more information. 

Active Management Technology Support

Intel AMT Support

Un-Confi gure ME

Advanced

F1   

Help             

  

↑

/

↓

    

Select Item                  

F5/F6 

Change Values                 

F9   

Setup Defaults

Esc  

Exit             

 

←

/

→

  

Select Item                  

Enter 

Select 

 SubMenu             

F10 

Save and Exit

<Disabled>

<Disabled>

Enable/Disable Intel(R)
Active Management Tech-
nology BIOS Extension. 
Note : iAMT H/W is al-
ways enabled. This Option 
Just controls the BIOS 
extension execution. 

InsydeH20 Setup Utility

Rev. 5.0

MEBX Configuration

This section configures MEBX setting. Please refer to Chapter 6 for more information. 

Summary of Contents for SU171
















































































Reviews:

No comments