manualshive.com logo in svg

DFI SU171, User Manual, Page: 26 / 79

Share
Download
DFI SU171 User Manual Download Page 26

www.d

fi

 .com

26

Chapter 2 Hardware Installation

Chapter 2

Chassis Intrusion Connector 

The board supports the chassis intrusion detection function. Connect the chassis intrusion 

sensor cable from the chassis to this connector. When the system’s power is on and a chassis 

intrusion occurred, an alarm will sound. When the system’s power is off and a chassis intrusion 

occurred, the alarm will sound only when the system restarts.

BIOS Setting

Configure the chassis intrusion detection function in the Advanced menu (“SIO NUVO-

TON6106D” submenu) of the BIOS. Refer to the chapter 3 for more information.

1

2

Ground

Signal

Expansion Slots

Mini

 

PCI Express Slots

The Mini PCIe sockets are used to install a Mini PCIe card. Mini PCIe card is a small form fac-

tor PCI card with the same signal protocol, electrical definitions, and configuration definitions 

as the conventional PCI.

PCI Express x4 Slot

Install PCI Express cards such as network cards or other cards that comply to the PCI Express 

specifications into the PCI Express x4 slot.

SIM Slot (optional)

The SIM slot on the system board is used to insert a SIM card.

Chassis 

Intrusion

Mini PCI Express 

(PCIe and USB signals)

Mini PCI Express 

(PCIe, USB and mSATA signals)

PCI Express x4

SIM Slot (optional)

Summary of Contents for SU171
















































































Reviews:

No comments