manualshive.com logo in svg

DFI SU171, User Manual, Page: 20 / 79

Share
Download
DFI SU171 User Manual Download Page 20

www.d

fi

 .com

20

Chapter 2 Hardware Installation

Chapter 2

Audio 

Rear Audio

The system board is equipped with 2 audio jacks. A jack is a one-hole connecting interface for 

inserting a plug.

•  Line-out Jack (Lime)

 

This jack is used to connect a headphone or external speakers.

 

• Mic-in 

(Pink)

 

This jack is used to connect an external microphone. 

BIOS Setting

Configure the onboard audio devices in the Advanced menu (“Audio Configuration” submenu) 

of the BIOS. Refer to chapter 3 for more information.

Driver Installation

Install the audio driver. Refer to the chapter 4 for more information.

Line-out Mic-in

I/O Connectors

Digital I/O Connector

Digital I/O Power Connector

The 8-bit Digital I/O connector provides powering-on function to external devices that are con-

nected to the connector.

Digital I/O Connector

Pins

Function

1

DIO7

2

DIO6

3

DIO5

4

DIO4

5

DIO3

6

DIO2

7

DIO1

8

DIO0

Line-out

Mic-in

Digital I/O

1

4

+12V

Ground

5VSB

+5V

Digital I/O Power

1

Summary of Contents for SU171
















































































Reviews:

No comments