manualshive.com logo in svg

DFI SU171, User Manual, Page: 18 / 79

Share
Download
DFI SU171 User Manual Download Page 18

www.d

fi

 .com

18

Chapter 2 Hardware Installation

Chapter 2

Graphics Interfaces

The display ports consist of the following:

•  1 DP++ port

•  1 HDMI/DP port

 

DP Port

The DP port is a digital display interface used to connect a display device such as a computer 

monitor. It is used to transmit audio and video simultaneously. The interface, which is devel-

oped by VESA, delivers higher performance features than any other digital interface.

HDMI Port

The HDMI port which carries both digital audio and video signals is used to connect a LCD 

monitor or digital TV that has the HDMI port.

BIOS Setting

Configure the display devices in the Advanced menu (“Video Configuration” submenu) of the 

BIOS. Refer to chapter 3 for more information.

Driver Installation

Install the graphics driver. Refer to chapter 4 for more information.

RJ45 LAN Ports

Features

• Intel

®

 I210AT PCIe (10/100/1000Mbps)

• Intel

®

 I219LM PCIe with iAMT11.0 (10/100/1000Mbps) (only Core i7/i5 supports iAMT)

The LAN ports allow the system board to connect to a local area network by means of a net-

work hub. 

BIOS Setting

Configure the onboard LAN ports in the Advanced menu (“ACPI Configuration” submenu) of 

the BIOS. Refer to chapter 3 for more information.

Driver Installation

Install the LAN drivers. Refer to chapter 4 for more information.

 LAN 1

 LAN 2

DP++

DP++

HDMI/DP

  LAN 2

LAN 1

HDMI/DP

Summary of Contents for SU171
















































































Reviews:

No comments