DFI ST102-SD User Manual Download

Page: 43 / 49

www.dfi.com

Chapter 8 Supported Software

Chapter 8

Chapter 8 - Supported Software

The system requires you to install drivers for some devices to operate properly. Your product

package may include a CD that contain drivers. You can also download the latest drivers from

the DFI Download Center:

http://www.dfi.com/DownloadCenter

Once you are in the Download Center page, select your product or type the model name and

click "Search" to find product-related resources such as documentation and drivers.

Drivers are available for the following devices in Windows 10:

•

Intel

Chipset Device Software

•

Intel

Graphics Driver

•

Intel

LAN Driver

•

Intel

ME Driver

•

Audio Driver

•

Intel

Serial IO Driver

Intel Chipset Device Software

The Intel

Chipset Device Software

is used for updating Windows

INF files so that the Intel

chipset can be recognized and configured properly in the system.

Please use the following procedure to install the “Intel

Chipset Device Software”.

1. Setup is ready to install

the utility. Click “Next” to

continue.

2. Read the license agreement

and then click “Yes”.

Summary of Contents for ST102-SD


















































Search results

Summary of Contents for ST102-SD

Reviews:

Related manuals for ST102-SD

Brands by name

Popular brands

DFI ST102-SD, User Manual

Search results

Summary of Contents for ST102-SD

Reviews:

Related manuals for ST102-SD

Brands by name

Popular brands