www.dfi.com
Chapter 3
- BIOS Settings
SD170
36
InsydeH2O Setup Utility
Rev. 5.0
F1
Help
Esc
Exit
↑/↓
Select Item
←/→
Select Item
F5/F6
Change Values
Enter
Select
SubMenu
F9
Setup Defaults
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
F1
Help
Esc
Exit
↑/↓
Select Item
←/→
Select Item
F5/F6
Change Values
Enter
Select
SubMenu
F9
Setup Defaults
F10
Save and Exit
Enable Console Redirection
Function
Console Redirection Setup
Console Serial Redirect
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
►
COM1
Enable VT-100, 115200, N81
►
COM2
Enable VT-100, 115200, N81
►
COM3
Enable VT-100, 115200, N81
►
COM4
Enable VT-100, 115200, N81
Port Enable
Use Global Setting
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
<Enabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
<Enabled>
<Disabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
Advanced
Advanced
Terminal Type
Select terminal type — VT_100, , VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate — 115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200.
Data Bits
Select data bits — 7 bits or 8 bits.
Parity
Select parity bits — none, even or odd.
Stop Bits
Select stop bits — 1 bit or 2 bits.
Flow Control
Select flow control type — none, RTS/CTS or XON/XOFF.
Console Redirection
Configure COM port serial settings in the submenu.
COM1/COM2/COM3/COM4/Pci Serial Port 0:22:3
Configure individual COM port serial settings in the submenu.
Port Enable
This field is used to enable or disable the COM port to redirect the console.
Use Global Setting
This field is to enable or disable using the global setting. When "Use Global Setting" is en-
abled, settings of the current port will dependent on Console Redirection settings. When "Use
Global Setting" is disabled, settings of the current port can be configured independently in this
section.
►
Advanced
