manualshive.com logo in svg

DFI M8M051, User Manual, Page: 28 / 29

Share
Download
DFI M8M051 User Manual Download Page 28

28

User's Manual | 

M8M051

Chapter 3

SOFTWARE USERGUIDE

Android Support List

(*) is depended on the NXP support.

Component

Support Status

Android 

Version

9.0

Kernel Version

4.14.98

eMMC

Support eMMC boot , eMMC v5.1, Linux ext4 file system

HDMI Video 

output

Support single display function, need to plug in HDMI cable before power on, 

resolution 4K@60.

Support single display function.

LVDS Panel

Support Panel: AM-1024600DTZQW

Support single display function.

LVDS 

Backlight 

(PWM)

Support control by Linux device node, level value 0~100.

I2C

Touch

Support Touch: IILIM2V.

Ethernet LAN1

Support “ping”, “ifconfig” console commands verify, static IP/DHCP Dynamic IP.

Support fixed MAC address (In eMMC).

Support Iperf3 app (Not build-in).

Micro USB 2.0 

HOST

1. Support USB HID Keyboard and Mouse Device.

2. Support USB Mass Storage with FAT32/Ext3/Ext4 filesystem.

Micro USB 2.0 

Device

1. Support connects to PC to update image by NXP iMX.8M uuu tool.

TYPE A USB 

3.0 HOST

1. Support USB HID Keyboard and Mouse Device.

2. Support USB Mass Storage with FAT32/Ext3/Ext4 filesystem.

I2S-Audio

1. Support system sound output to LINE OUT Connector.

2. Support adjusts sound volume by OS setting UI.

3. Support Music app for test play MP3/WAV file (16 bit, 44.1 kHz sample rate, CD 

quality.

4. Support sound recorder for test recording PCM file with Mono MIC_IN audio, file 

store to eMMC.

M.2 

2242/3042 

B key

Support “lspci” console command for check PCIe card status. 

Support “lsusb” console command for check PCIe card status. 
4GLTE module: Quectel EM06

M.2 2230 E 

key

Support “lspci” console command for check PCIe card status. 

Support “lsusb” console command for check PCIe card status. 
WiFi/BT module: RTL8822CE

UART1 - 

RS232

(Debug serial 

port)

Support output Linux kernel debug log, use PC serial terminal tool read log (ex. 

PuTTY), BR 115200.

UART2 - 

RS232

For M.2

Support DTE mode, BR 115200 with CTS/RTS follow control loopback test (need DFI 

Android test utility).

UART3 - 

RS485

Support Loopback test, BR 115200 (need DFI Android test utility).

UART4 - 

RS232

Support DTE mode, BR 115200 with CTS/RTS follow control loopback test (need DFI 

Android test utility).

UART4 - 

RS422

Support Loopback test, BR 115200 (need DFI Android test utility).

UART4 - 

RS485

Support Loopback test, BR 115200 (need DFI Android test utility).

DIO

Support read input high/low status, set output voltage high/low status, control by 

Linux device node, 8 pins.

DIO-PWM

Support control by Linux device node.

CAN Bus

Support “cansend”, “candump” console commands for test send/read data.

Micro SD Card 

(SD slot)

Support SD storage with FAT32/Ext3/Ext4 filesystem. (Support Kingston, micro SDHC 

4GB class 4, 4GB/16GB).

For standard product, We don’t port any SDIO module.

Reset / Power 

on Key

HW control.

I2C-RTC

Support Linux “date -s”and “hwclock -w” console commands to set system time.

I2C-Thermal 

sensor

Support read device temperature (degrees C) by Linux device node.

Secure Boot

Not Support

Wifi /BT

Support WiFi/BT module: RTL8822CE 

1.RTL8822CE WiFi: Support Wifi STA and AP Mode

2.RTL8822CE BT: Support Bluetooth Tethering mode

LTE and  

SIM slot 

Support 4GLTE module: Quectel EM06  

Support data-link only. 

Android  

Build Type 

ENG Build without SELinux.   

Android  

ADB 

Support   

Summary of Contents for M8M051






























Reviews:

No comments