manualshive.com logo in svg

DFI M8M051, User Manual, Page: 27 / 29

Share
Download
DFI M8M051 User Manual Download Page 27

27

User's Manual | 

M8M051

Chapter 3

SOFTWARE USERGUIDE

M.2 2230 E 

key

Support “lspci” console command for check PCIe card status. 

Support “lsusb” console command for check PCIe card status. 
WiFi/BT module: RTL8822CE

UART1 - 

RS232

(Debug serial 

port)

Support output Linux Uboot and kernel debug log, use PC serial terminal tool read log 

(ex. PuTTY), BR 115200.

UART2 - 

RS232

For M.2

Support DTE mode, BR 115200 with CTS/RTS follow control loopback test, BR 115200 

(need DFI Linux user space utility).

UART3 - 

RS485

Support Loopback test, BR 115200 (need DFI Linux user space utility).

UART4 - 

RS232

Support DTE mode, BR 115200 with CTS/RTS follow control loopback test, BR 115200 

(need DFI Linux user space utility).

UART4 - 

RS422

Support Loopback test, BR 115200 (need DFI Linux user space utility).

UART4 - 

RS485

Support Loopback test, BR 115200 (need DFI Linux user space utility).

DIO

Support read input high/low status, set output voltage high/low status, control by 

Linux device node, 8 pins.

DIO-PWM

Support control by Linux device node.

CAN Bus

Support “cansend”, “candump” console commands for test send/read data.

Micro SD Card 

(SD slot)

Support SD card boot, support SD storage, EXT4/EXT3/FAT filesystem. (Support 

Kingston, micro SDHC 4GB class 4, 4GB/16GB).

For standard product, We don’t porting any SDIO module.

Reset / Power 

on Key

HW control.

I2C-RTC

Support Linux “date -s”and “hwclock -w” console commands to set system time.

I2C-Thermal 

sensor

Support read device temperature (degrees C) by Linux device node.

Play Video

Support play 4K MPEG4 H.264 and H.265 file (use NXP gstreamer tool).

Watch Dog

Support NXP utility “wdt_driver_test.out”(*) to test Watch Dog reboot function.

Secure Boot

Support(Option)

OS Suspend

Not support suspend.

Package 

manager

N/A, For standard product, We didn’t build in package manager.

Wifi /BT

Support WiFi/BT module: RTL8822CE

1. RTL8822CE WiFi: Support Wifi STA Mode (connect Wifi AP), use ifconfig, wpa_

supplicant console commands, use ping console commands verify WiFi function. Soft 

AP Mode option.

2. RTL8822CE BT: Support files transfer protocol only (BT OBEX protocol), use obexctl 

console commands.

LTE and SIM 

slot

Support 4GLTE module: Quectel EM06

Support data-link only, use ping console commands verify function.

Image Size

1. flash.bin : Around 1.05 MB 

2. Image: Around 25.1 MB 

3. rootfs.tar.bz2: compressed: Around 481 MB

Free storage 

size

Around 11.7 GB free space (eMMC size 16GB, around 2.3GB used of 14GB file system 

size, /dev/root)

Summary of Contents for M8M051






























Reviews:

No comments