70
3
BIOS Setup
PS2KB Wakeup Select
This field allows you to use a function key or password to wake up
the system.
Hot Key
Use any of the function keys, between F1 and F12,
to wake up the system.
Password
Use a password to wake up the system. Select this
option and press <Enter>. Enter your password. You
can enter up to 5 characters. Type in exactly the
same password to confirm, then press <Enter>.
Important:
If you forgot the password, you must power-off
the system, unplug the power cord and clear the
CMOS data by setting JP1 pins 2 and 3 to On.
PS2KB Wakeup from S1-S3
The options in this field will allow you to use the PS/2 keyboard to
wake up the system from the S1 or S3 state.
PS2MS Wakeup from S1-S3
This field, when enabled, allows you to use a PS/2 mouse to wake
up the system from the S1 or S3 state.
VGA
When set to On, the system will respond and wake up to any VGA
activity.
LPT & COM
Select the port you would like the system to respond and wake up
when an event occurs on that port.
HDD & FDD
When set to On, the system will respond and wake up to any hard
drive or floppy drive activity.