12
Chapter 2
HARDWARE INSTALLATION
User's Manual |
GHF51
Battery
X
I/O Connectors
The external lithium ion battery supplies power to the real-time clock and CMOS memory as an
auxiliary source of power when the main power is shut off.
Safety Measures
• There exists explosion hazard if the battery is incorrectly installed.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to local ordinances.
Battery
3.3V
2
1
GND
External Battery
Connect to board
Bottom View
Bottom View
12V DC Terminal Block
X
I/O Connectors
Important:
Insufficient power supplied to the system may result in instability or malfunction
of the add-in boards and peripherals. Calculating the system’s approximate power
usage is important to ensure that the power supply meets the system’s consump-
tion requirements.
This 2-pin terminal block is considered a low power solution. Connect a DC power cord to this
terminal block by inserting the wire into the block and then screw tight the screw on top to
secure the wire in place. Please make sure the positive and negative wires are installed cor-
rectly. Using a voltage more than the recommended range may fail to boot the system or
cause damage to the system board.
Note:
An optional DC cable converter can be purchased to convert the 2-pin terminal
block to a coaxial DC jack.
1 (+) : +12V
2 (-) : GND
