DFI G486VPB, User Manual

Page: 70 / 96

PCI/ISA System Board
70
Save & Exit Setup
When all the changes have been made, highlight “Save
& Exit Setup” and press <Enter>. The message below
will appear:
Save to CMOS and Exit (Y/N)? N
Type “Y” and press <Enter>. The following message
will appear:
Reboot System (Y/N)? N
Type “Y” and press <Enter>. The modifications you
have made will be written into the CMOS memory, and
the system will reboot. You will once again see the
initial diagnostics on the screen. If you wish to make
additional changes to the setup, press <Ctrl> <Alt>
<Esc> simultaneously or <Del> after memory testing is
done.
Exit Without Saving
If you do not want to save the changes you have made,
highlight this option and press <Enter>. The message
below will appear:
Quit Without Saving (Y/N)? N
Type “Y” and press <Enter>. The system will reboot
and you will once again see the initial diagnostics on the
screen. If you wish to make any changes to the setup,
press <Ctrl> <Alt> <Esc> simultaneously or <Del> after
memory testing is done.