DFI G486VPA, User Manual, Page: 58 / 132

PCI/ISA System Board
Pin 1 of the ZIF Socket
3. Position the CPU above the ZIF socket. Make sure
pin 1 of the CPU is aligned with pin 1 of the socket.
Lower the chip until the pins are inserted properly in
their corresponding holes. Remember that no force is
needed to install the CPU. If the CPU will not easily
insert, please verify you have pin 1 of the CPU
aligned with pin 1 of the socket. Applying too much
pressure can damage the CPU or the socket.
2-48
u
Installation Overview