PUMA Station Board
b. An option box will appear for you to choose.
Choose Slot-Specific Only (Default) and press
<Enter>.
c. The same step should be done if you want to
change the following functions.
Note:
Some function may only have one choice
setting and therefore cannot be changed.
3. To change a function's Resource settings, use the
up and down arrow keys to highlight a function
and then press <F6>. When you are satisfied with
the current settings, press <Esc> to return to the
previous menu.
Note
:
6-13
u
EISA Configuration Utility
DFI EISANet-500 I/O Addresses
Slot-Specific Only (Default)
DFI EISANet-500 EPROM
EPROM Disabled (Default)
Bus Master
Bus Release After Preempt
23 BCLK Cycles
DFI EISANet-500 Iterrupt
Interrupt Edge/Level
Edge Triggered Interrupt
Ethernet
Packet Reception
Receive Own Packets
Connector Selection
Thin Ethernet (BNC1) [ETHERNet-500ECT]
[Done=ESC]
[Change=ENTER]
[Resources=F6]
[PgUp] [PgDn]
[Help=F1]
Edit Settings for: DFI EISANet-500 Ethernet Adapter
[Select=Enter]
[Cancel=ESC]
This board supports both slot-specific and ISA compatible I/O
addressing. The ISA mode should only be used for software
compatibility with ISA drivers.
( ) Slot-Specific only (Default)
( ) Slot-Specific and ISA