EB3486-TN
This menu box contains a list of all "choice" settings and
may have one or more resource settings. To change a
function's choice setting:
a. Use the up and down arrow keys to highlight a
function and then press <Enter>. The first section
"DFI EISANet-500 I/O Addresses" box was already
shown on the next page.
DFI EISANet-500 I/O Addresses
Slot-Specific Only (Default)
DFI EISANet-500 EPROM
EPROM Disabled (Default)
Bus Master
Bus Release After Preempt
23 BCLK Cycles
DFI EISANet-500 Interrupt
Interrupt Edge/Level
Edge Triggered Interrupt
Ethernet
Packet Reception
Receive Own Packets
Connector Selection
Thin Ethernet (BNC1) [ETHERNet-500ECT]
[Done=ESC]
[Change=ENTER]
[Resources=F6]
[PgUp] [PgDn]
[Help=F1]
Edit Settings for: DFI EISANet-500 Ethernet Adapter
EISA Configuration Utility
u
6-12