PUMA Station Board
6-9
u
EISA Configuration Utility
Step 2
-
Add and Remove Boards
System - DFI EB3486-TN EISA SYSTEM BOARD
Slot
1 - Empty
Slot
2 - Empty
Slot
3 - WG-1200VL
Slot
4 - Empty
Slot
5 - Empty
Slot
6 - Empty
Slot
7 - Empty
Slot
8 - Empty
-
Press INSERT to add a board that was not deleted or has not been installed yet.
-
Press DEL to remove the selected board.
-
Press F7 to move the selected board to a different slot.
-
Press Esc when finished with this step.
[Add=INSERT]
[Remove=DEL]
[Move=F7]
[Done=ESC]
[HELP=F1]
Select a slot for:
WG-1200VL
Board slot type is ISA16.
Slot Selection
Slots are listed in recommended order.
Slot
Type
Bus Master
[Select=ENTER]
1
EISA Yes
2
EISA Yes
4
EISA Yes
5
EISA Yes
6
EISA Yes
b. Select the slot that corresponds to the actual slot
where
the adapter board to be moved will reside,
and press
<Enter>.
c. If you are finish with this step, choose Done to return
to the main menu.
Step 3: Change Configuration Settings
Use this step to view or change configuration settings
for any board that is installed. If you skip this step, all
settings will remain set to their default values.
1. Choose Change Configuration Settings and a box
similar to the one shown on the next page will
appear.