EB3486-TN
EISA Configuration Utility
u
6-6
b. Select the board you want to add and press <Enter>.
If you wish to add an ISA board, choose Add ISA
option by pressing <Insert> at the "Select the Board
to
Add" screen. An ISA Board Database box
similar to
the one shown on the screen below will
appear.
Note:
You must define an ISA board before it will appear
in the ISA Database definition box. See the "Define
ISA Board" section on page 6-21 of this manual for
further information.
If you do not want to add a board, choose Cancel to
go back to the Add and Remove Boards.
Highlight the board you want to add in the configuration
and press <Enter>. A Slot Selection box similar to one
shown on the next page will appear.
System - DFI EB3486-TN EISA SYSTEM BOARD
Slot
1 - Empty
Slot
2 - Empty
Slot
3 - Empty
Slot
4 - Empty
Slot
5 - Empty
Slot
6 - Empty
Slot
7 - Empty
Slot
8 - Empty
-
Press INSERT to add a board that was not deleted or has not been installed yet.
-
Press DEL to remove the selected board.
-
Press F7 to move the selected board to a different slot.
-
Press Esc when finished with this step.
[Add=INSERT]
[Remove=DEL]
[Move=F7]
[Done=ESC]
[HELP=F1]
Select the ISA board to load or press <Esc> to exit.
ISA Board Database
Step 2 - Add and Remove Boards
[Ok=ENTER]
[Cancel=ESC]
a
[ ] WG-1200VL