EB3486-TN
Initial Setup Program
u
5-7
Note:
The VL-Bus Adapter must be set to "Present" if there is
any local bus device installed.
The Memory Write buffer must be set to disable if any
problem occurs on the VL-Bus Adapter. If memory
write
buffer is enabled, some VL-Bus adapters can
gain much
performance benefit from it.
Use the arrow keys to move the highlight bar to the
options you wish to change or modify. Use the <Page
Up> or <Page Down> keys to make the corresponding
changes.
Set the password checking option to "Always" or
"Setup" if you want to enable this option. Setting it to
"Always" will prompt you for a password everytime you
cold boot your computer or access setup. When you set
the option to "Setup", you will be prompted for a
password only when trying to access setup.