PUMA Station Board
AMI BIOS Setup Utilities
If you want to change your CMOS setup, or your
CMOS setup is incorrect, press <Del> when the mes-
sage, "Hit <Del> if you want to run setup," appears on
the screen. Again, if you enabled the password option,
you will be prompted to the message below:
Enter CURRENT Password:
The default password is AMI. For information on how
to change the password, refer to the "Change Password"
section. After entering the correct password, the screen
below appears. If the password option is disabled, you
will directly access this screen.
Use the arrow keys to highlight the option you want and
hit <Enter>.
5-2
u
Initial Setup Program