DFI CS631-C246/Q370 User Manual Download Page 71

Page: 71 / 79

Chapter 6

SUPPORTED SOFTWARE

User's Manual |

CS631

Chapter 6 - Supported Software

Auto-run Menu

After inserting your DVD-ROM into your

optical drive or executing your DVD image,

the System Utility auto-run menu may pop

up. Click on the utility or driver that is to be

installed on the system. Please refer to the

following sections that correspond to your

selection for more information.

Intel Chipset Software Installation Utility

The Intel Chipset Software Installation Utility is used for updating Windows

INF files so that

the Intel chipset can be recognized and configured properly in the system.

1. Setup is ready to install the util-

ity. Click “Next”.

2. Read the license agreement

then click “Accept”.

Install drivers, utilities and software applications that are required to facilitate and enhance the

performance of the system board. You may acquire the software from your sales representa-

tives, from an optional DVD included in the shipment, or from the website download page at

https://www.dfi.com/DownloadCenter

Note:

This step can be ignored if the applications are downloaded standalone files.

Click “More >>” on the lower right to go to

the next page of the auto-run menu, and

click “<< Previous” to return to the previous

menu.

Summary of Contents for CS631-C246/Q370
















































































Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands

DFI CS631-C246/Q370, User Manual

Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands