www.dfi.com
CS101-Q370/C246/H310
Chapter 2
- Hardware Installation
23
The system board allows you to connect a LCD Display Panel by means of the LVDS LCD panel
connector and the LCD/Inverter power connector. These connectors transmit video signals and
power from the system board to the LCD Display Panel.
Jumper Settings
Refer to the “Jumper Settings” section in this chapter for settings relevant to the LCD panel.
BIOS Setting
Configure the LCD panel in the Advanced menu (“PTN3460 Configuration” submenu) of the
BIOS. Refer to the chapter 3 for more information.
2
1
LVDS LCD
Panel
40
39
Pin Function
Pin
Function
1
GND
2
GND
3
4
5
LVDSA_3-
6
LVDSB_3-
7
GND
8
GND
9
10
11
LVDSA_2-
12
LVDSB_2-
13
GND
14
GND
15
16
17
LVDSA_1-
18
LVDSB_1-
19
GND
20
GND
21
22
23
LVDSA_0-
24
LVDSB_0-
25
GND
26
GND
27
LV
28
LV
29
LVDSA_CLK-
30
LVDSB_CLK-
31
GND
32
GND
33
DDC_CLK
34
NC
35
DDC_DATA
36
+3.3V
37
Panel Power
38
Panel Power
39
Panel Power
40
Panel Power
▼
LVDS LCD Panel Connector
▼
LCD/Inverter Power Connector
Pin Function
1
GND
2
GND
3
Panel Inverter Brightness
Voltage Control
4
Panel Power
5
+3.3V
6
Panel Backlight On/Off
Control
7
LCD/Inverter Power
8
LCD/Inverter Power
LCD/Inverter
Power
8
1
LVDS LCD Panel
Note:
1. LVDS LCD Panel Connector (DFI PN: 346-714000-204G) De-
scription: WTB HEADER 40P, 1.25mm, M,H=4.8mm, 180D, SMT, BEIGE,
712-76-40GWE0(PRINEX) RoHS
2. LCD/Inverter Power Connector (DFI PN: 3346-510801-100G) Description: BOX
HEADER 1*8, 8P/2.0mm/180D, 721-81-08TW00(PINREX)RoHS
Note:
The signal of the LCD panel can only be displayed either via LVDS or via eDP.
►
Internal I/O Ports
