88
3
BIOS Setup
3.1.6 PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
3.1.6.1 Reset Configuration Data
Enabled
The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled
The BIOS will not reset the configuration data.
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.5.20 PWR Lost Resume State
Keep Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power
button to power-on the system.
Turn On
When power returns after an AC power failure, the
system will automatically power-on.
Last State
When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the system’s power is
off when AC power failure occurs, it will remain off
when power returns. If the system’s power is on
when AC power failure occurs, the system will power-
on when power returns.