41
2
Hardware Installation
The front audio is disabled.
The rear audio is enabled.
The front audio is enabled.
The rear audio is disabled.
Pins 5-6 and 9-10 short
(default)
Pins 5-6 and 9-10 open
•
Line-in Jack (Light Blue)
This jack can be connected to the line-out jack of any external
audio devices such as Hi-fi set, CD player, AM/FM radio tuner,
synthesizer, etc. Connect a stereo cable from the line-out jack of
your external device to this line-in jack.
•
Mic-in Jack (Pink)
This jack is used to connect an external microphone. Use the C-
Media application software to select between using this jack and
the front audio’s mic-in jack.
Front Audio
The front audio connector (J19) allows you to connect to the
line-out and mic-in jacks that are at the front panel. Using the
line-out jack disables the rear audio’s line-out function. Use the C-
Media application software to select between using the mic-in
jack and the rear audio’s mic-in jack.
Remove the jumper caps from pins 5-6 and pins 9-10 of J19 prior
to connecting the front audio cable connector. Make sure pin 1 of
the cable connector is aligned with pin 1 of J19. If you are not using
this connector, make sure to replace the jumper caps back to their
original pin locations.
4-Channel Audio
The 4-channel connector suppor ts four audio output signals:
center channel, subwoofer, rear right channel and rear left chan-
nel. The 4 audio output signals together with the line-out jack (at
the rear panel) support 6-channel audio output.
One card-edge bracket, mounted with a rear jack and a center/
subwoofer jack, will be provided as an option. Remove the jumper
caps from pins 2-4 and pins 6-8 of J20 prior to connecting the
audio cable connector. Make sure pin 1 of the cable connector is
