background image

1. Safety Introductions

2. Product Introduction

2.1 Product Overview

·This chapter contains important safety and operating instructions. Read and keep this 
     manual for future reference. 
·Before using the inverter, please read the instructions and warning signs of the battery 
     and corresponding sections in the instruction manual. 
·Do not disassemble the inverter. If you need maintenance or repair, take it to a 
     professional service center. 
·Improper reassembly may result in electric shock or fire. 
·To reduce risk of electric shock, disconnect all wires before attempting any maintenance 
     or cleaning. Turning off the unit will not reduce this risk. 
·Caution: Only qualified personnel can install this device with battery. 
·Never charge a frozen battery. 
·For optimum operation of this inverter, please follow required specification to select 
     appropriate cable size.It is very important to correctly operate this inverter. 
·Be very cautious when working with metal tools on or around batteries. Dropping a 
     tool may cause a spark or short circuit in batteries or other electrical parts,even cause 
     an explosion. 
·Please strictly follow installation procedure when you want to disconnect AC or DC 
     terminals. Please refer to ”Installation” section of this manual for the details. 
·Grounding instructions - this inverter should be connected to a permanent grounded 
     wiring system. Be sure to comply with local requirements and regulation to install this 
     inverter. 
·Never cause AC output and DC input short circuited. Do not connect to the mains 
     when DC input short circuits.

This is a multifunctional inverter,combining functions of inverter, solar charger and 
battery charger to offer uninterruptible power support with portable size. Its comprehensive 
LCD display offers user configurable and easy accessible button operation such as battery 
charging ,AC/solar charging, and acceptable input voltage based on different applications. 

1: Inverter Indicators

2: LCD display

3: Function Buttons

4: Battery input connectors

5: RS 485 Port

6: CAN Port

7: DRMs Port

8: Parallel port

9: Function Port

10: Generator input

16: WiFi Interface

11: Load

12: Grid

13: Power on/off button

14: DC Switch

15: PV input with two MPPT





- 01 -

- 02 -

Summary of Contents for SUN-3.6K-SG03LP1-EU




















Reviews: