- 06 -
3.2 Mounting instructions
Installation Precaution
This Hybrid inverter is designed for outdoor use(IP65), Please make sure the installation site
meets below conditions:
Please AVOID direct sunlight, rain exposure, snow laying up during installation and
operation. Before connecting all wires, please take off the metal cover by removing
screws as shown below:
· Not in direct sunlight
· Not in areas where highly flammable materials are stored.
· Not in potential explosive areas.
· Not in the cool air directly.
· Not near the television Antenna or antenna cable.
· Not higher than altitude of about 2000 meters above sea level.
· Not in environment of precipitation or humidity(>95%)
Considering the following points before selecting where to install:
· Please select a vertical wall with load-bearing capacity for installation, suitable for installation
on concrete or other non-flammable surfaces,installation is shown below.
· Install this inverter at eye level in order to allow the LCD display to be read at all times.
· The ambient temperature should be between -25~60
℃
to ensure optimal operation.
· Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient
heat dissipation and have enough space for removing wires.
