background image

5.1 Main Screen

5. LCD Display Icons

The LCD is touchscreen,below screen shows the overall information of the inverter.

1.The icon in the center of the home screen indicates that the system is Normal operation.
If it turns into “comm./F01~F64” ,it means the inverter has communication errors or
other errors,the error message will display under this icon(F01-F64 errors,detail error info
can be viewed in the System Alarms menu).

2.At the top of the screen is the time.

3.System Setup Icon,Press this set button,you can enter into the system setup screen which
including Basic Setup,Battery Setup,Grid Setup,System Work Mode,Generator port use,
Advanced function and Li-Batt info.

4.The main screen showing the info including Solar,Grid,Load and Battery.Its also
displaying the energy flow direction by arrow.When the power is approximate to high level,
the color on the panels will changing from green to red so system info showing vividly on
the main screen.

· PV power and Load power always keep positive.
· Grid power negative means sell to grid,positive means get from grid.
· Battery power negative means charge,positive means discharge.

25%

05/28/2019  15:34:40

8.30

KW

-2.00

KW

-3.00

KW

3.00

KW

0

12

0

8

0

8

0

8

54

5.1.1  LCD operation flow chart

Main Screen

Solar Page

Solar Graph

Grid Graph

BMS Page

Load Graph

Battery Setting

System Work Mode

Grid Setting

Gen Port Use

Basic Setting

Advanced Function

Device info

Grid Page

Inverter Page

Battery Page

Load Page

System Setup

- 21 -

- 22 -

Summary of Contents for INGE





















Reviews: