Single port KVM over IP switch
UNIX and UNIX-like OS (UNIX, Solaris, Linux)
If you like to access the share via SAMBA, SAMBA has to be set up properly. You may
either edit the SAMBA configuration file /etc/samba/smb.conf , or use the Samba Web
Administration Tool (SWAT) or WebMin to set the correct parameters.
For additional options see the Section called
Options
for details.
Creating an Image
Floppy Images
UNIX and UNIX-like OS
To create an image file, make use of “dd”. This is one of the original UNIX utilities and is
included in every UNIX-like OS (UNIX, Sun Solaris, Linux).
To create a floppy image file, copy the contents of a floppy to a file. You can use the following
command:
dd
[
if=/dev/fd0
] [
of=/tmp/floppy.image
]
dd reads the entire disc from the device /dev/fd0 , and saves the output in the specified
output file /tmp/floppy.image . Adjust both parameters exactly to your needs (input device
etc.)
MS Windows
You can use the tool “ RawWrite for Windows ”. It is included on the CD ROM shipped with
IP-KVM switch.
Figure 6-10. RawWrite for Windows selection dialog
From the menu, select the tab “ Read ”. Enter (or choose) the name of the file in which you
would like to save the floppy content. Click on the button “ Copy ” to initiate the image
creation process.
For related tools you may have a look at www.fdos.org 1
.
