21
About the Display and Cursor Operation
Moving the cursor and setting parameter
values
1.
Press the [MENU/EXIT] button to access to the available
function groups.
2.
Use the [
] [
] buttons to select the desired function
group.
3.
Press the [
] button to enter in the selected function
group.
4.
Use the [
] [
] buttons to scroll the list of parameters.
The selected parameter field is underlined.
5.
Use the
[
]
[
] buttons to set the desired value.
6.
Press the [MAIN/EXIT] button to return to the main page.
Assigning the Name You Specify
In many cases you'll have to assign a name to a file. In the following
example, we will learn how to give a Memory name.
After the selection of saving a Memory, the display looks as follows:
A Memory name is suggested by the VIVO H1.
1.
Use the [
][
] buttons to select a different character.
2.
Use the
[
]
[
] buttons to select the next character
position you want to change, then use the [
][
]
buttons again.
3.
You can press the [A/a/#] Function button to switch
between upper- and lower-case characters as well as
numbers.
4.
To delete the selected character, simultaneously press the
central and right Function button.
5.
To insert a character, simultaneously At the same press
the left and central Function button.
6.
Repeat steps (2) and (3) to complete the name.
