Dexcowin COCOON DX-7020 User Manual Download Page 6

Page: 6 / 61

(Model: DX-7020) User Manual

1.2 Manufacturer & User Obligations

1.2.1 Manufacturer

’s Liability

The manufacturer of this device assumes responsibility for the safe and regular operation of

this device when:

▪

Approved replacement parts are used.

▪

Maintenance and repairs are performed by an authorized distributor/ manufacturer.

▪

This equipment is used correctly according to the user manual.

▪

Equipment damage or malfunction is not the result of an error on the part of the user.

RADIATION HAZARD

This X-ray unit could be dangerous to patients and operators unless safe

exposure factors, operating instructions, and maintenance schedules are
observed

1.2.2

User Obligations

The user must perform periodic tests at regular intervals to ensure safety. These tests must

be performed and follow country and local X-ray safety regulations.

The user must perform regular inspection and maintenance of the mechanical and electrical

components of this equipment to ensure safe and consistent operation (IEC 60601-1).

The owner of this equipment must follow the safety precautions and troubleshooting outlined
in this manual.

CAUTION

Please do not operate this device before reading the manual and its
related materials.

Summary of Contents for COCOON DX-7020






























































Search results

Summary of Contents for COCOON DX-7020

Reviews:

Related manuals for COCOON DX-7020

Brands by name

Popular brands

Dexcowin COCOON DX-7020, User Manual

Search results

Summary of Contents for COCOON DX-7020

Reviews:

Related manuals for COCOON DX-7020

Brands by name

Popular brands