Dexcowin COCOON DX-7020 User Manual Download Page 5

Page: 5 / 61

(Model: DX-7020) User Manual

1.1 Notice

The

DX-7020

a portable, handheld dental X-ray device.

This is a diagnostic device that can be used on pediatric and adult patients. I

t’s

designed for

taking diagnostic intraoral dental X-rays using conventional film (F-speed or greater film),

PSP (Phosphor plates), or digital sensors. This device is indicated for use by only trained and

qualified dentists or dental technicians.

This manual contains instructions, procedures, technical drawings and descriptions for the

DX-7020. Do not operate this device until you have read and reviewed this accompanying user

manual completely.

DX-7020 complies with the MDD 93/42/EEC as amended by 2007/47/EC. Refer to the
Certificate of Conformance accompanying your device for verification.

DX-7020 is a trademark registered by Dexcowin Co., Ltd in Korea and other countries.

For further information not covered in this manual and

any incidents concerning the device,

please report it to the manufacturer at:

DEXCOWIN CO., LTD.

Email: [email protected]

Phone: (+82) 2 2027 2880

Fax: (+82) 2 2027 2884

Version: 1820.8

Model: DX-7020

Country: EU (EN)

Initial Date: 03-10-2017

Rev. Date: 11-03-2022

Summary of Contents for COCOON DX-7020






























































Search results

Summary of Contents for COCOON DX-7020

Reviews:

Related manuals for COCOON DX-7020

Brands by name

Popular brands

Dexcowin COCOON DX-7020, User Manual

Search results

Summary of Contents for COCOON DX-7020

Reviews:

Related manuals for COCOON DX-7020

Brands by name

Popular brands