manualshive.com logo in svg

Dexcowin COCOON DX-7020, User Manual

Introducing the Dexcowin COCOON DX-7020 - a state-of-the-art device designed for medical imaging. Access its comprehensive User Manual for free download, exclusively available at manualshive.com. Unlock the full potential of this cutting-edge product with our detailed manual, providing step-by-step instructions and valuable insights.

Share
Download
background image

(Model: DX-7020) User Manual 

33 

 

4.4 Battery Usage 

 

There are two types of batteries used for the DX-7020.  

Internal Battery 

This battery type is not detachable. It is embedded in the bottom part of the handle. Turn on 
the device to check if it is operating properly.  

If any problem occurs during troubleshooting, 

see section 5.2 

 

 

 

 

 

 

 

External Battery   

This battery is an external back-up battery.  It connects to the terminal on the main body at 
the rear of the machine just behind the main control panel. 

Turn on the device to check if it is operating properly.  

If any problem occurs during troubleshooting, 

see section 5.2 

 

 

 

 

 

 

 

 

Summary of Contents for COCOON DX-7020






























































Reviews:

No comments

Related manuals for COCOON DX-7020

Backyard Play Systems 4430 Assembling User Manual preview
4430
Brand: Backyard Play Systems Pages: 54
GALLERY 36 Instruction Manual preview
36
Brand: GALLERY Pages: 18
Latchways R20 User Instructions preview
R20
Brand: Latchways Pages: 80
Kapriol 27956 Manufacturer'S Instruction And Information preview
27956
Brand: Kapriol Pages: 28
K&K M8700 Manual preview
M8700
Brand: K&K Pages: 8
Danelec DM800 Installation Manual preview
DM800
Brand: Danelec Pages: 67
Major 4200 Operator'S Manual & Parts List preview
4200
Brand: Major Pages: 52
Jasco UltraPro User Manual preview
UltraPro
Brand: Jasco Pages: 2
ParaBody Parabody 805 User Manual preview
Parabody 805
Brand: ParaBody Pages: 6
ParaBody 821 User Manual preview
821
Brand: ParaBody Pages: 11
PASCO ME-9430 Instruction Manual And Experiment Manual preview
ME-9430
Brand: PASCO Pages: 30
Quark-Elec QK-A031 Setup Manual preview
QK-A031
Brand: Quark-Elec Pages: 2
ABB RELION Series Product Manual preview
RELION Series
Brand: ABB Pages: 33
Allen-Bradley DeviceNet CompactPCI 1784-CPCIDS Installation Instructions Manual preview
DeviceNet CompactPCI 1784-CPCIDS
Brand: Allen-Bradley Pages: 36
Exmark ARS180KA21 Operator'S Manual preview
ARS180KA21
Brand: Exmark Pages: 36
Manley NU MU Owner'S Manual preview
NU MU
Brand: Manley Pages: 18
Nautilus NT 1800 Assembly Manual preview
NT 1800
Brand: Nautilus Pages: 2
Stocks AG Turbo Jet 10 i-CON Operating Manual And Parts List preview
Turbo Jet 10 i-CON
Brand: Stocks AG Pages: 30

Brands by name

Popular brands

Load more brands