DEWESOFT E-Mobility DEMO, User Manual

Page: 9 / 28

USER MANUAL
E-Mobility DEMO
Motor voltage measurement
To measure the voltage coming from the inverter you must connect ​
Blue U​
U​
, ​ Red U​
V​
, and ​ Yellow U​
w
banana plug each to its own input and complete the Delta connection with the corresponding cables.
c. Current measurement
To connect the Current transducers from the car to the measurement unit, you need to connect the
DSUB9 connectors to the LV inputs. Each DSUB9 is equipped with a TEDS chip so the channel setup
should be set automatically.
Warning
Excitation of Current Transducers (CT) should ​not exceed 5V​.
1.1 Version of the document
9