DS-CAM-88c / DS-CAM-120c / DS-CAM-175c / DS-CAM-320c
TECHNICAL REFERENCE MANUAL
4.3.2. SIRIUS® connection example
In this picture you see a typical SIRIUS measurement instrument, consisting of one SBOX unit
(integrated PC) on bottom and one SIRIUS slice on top (from rear side).
The camera is directly connected to the Gigabit-LAN port. The second cable to the camera contains the
power (from SBOX Power out) and the trigger, connected to the SYNC port of the SIRIUS slice. The
camera frames are now in perfect sync with the analog data acquired by DewesoftX®.
Hint
Even if the camera is connected, synching to other SIRIUS devices is still possible, because
there are different pins used on the SYNC port for triggering/synching.
Illustration 4: SIRIUS SBOX with 1 SIRIUS slice connected to the DS-CAM-120c (per cable H12f-L1B7m-L00B4m-3M)
DS-CAM-88c / DS-CAM-120c / DS-CAM-175c / DS-CAM-320c DS-V20-2
14/40
