DS-CAL
SOFTWARE USER MANUAL
3.3. Scope of supply
3.3.1. DS-CAL-BOX
Qty
Type
Usage
1x
DS-CAL-BOX
DS-CAL test board.
1x
DC Power supply 60W 12V including power
cord
Power supply for DS-CAL test board.
1x
USB
‑
A to USB
‑
B
‑
mini cable, 1.8m
Used for connecting DS-CAL test board to
the PC.
1x
Installation USB stick
Contains the software, drivers and the
manuals.
2x
USB
‑
to
‑
serial converter including RS232
cable, 1m (D9f-D9f
‑
1M
‑
RS232)
Used for connecting the PC, multifunction
calibrator and the digital multimeter
together.
1x
CAN Y
‑
cable, 1.2m (D9F
‑
2D9F
‑
1.2m)
Used for connecting the CAN port(s)
between UUT and the DS-CAL test board.
1x
PPS cable, 2m (L1B4M
‑
BNC
‑
2m)
Used for a precise PPS time source signal.
Connects to the DS-CAL test board.
2x
Sync cable, 3m (L00B4m
‑
L00B4m
‑
3m)
Used for connecting the Sync ports between
the UUT and the DS-CAL test board.
1x
Banana cable, 2m (CABLE
‑
GND) with
crocodile clip
Used for connecting GND between the UUT
and the DS-CAL test board.
12x
Safety test lead 4mm, red with gold
‑
plated
contacts, 1m
4x used for multifunction calibrator and
digital multimeter connection with the
DS-CAL test board.
11x
Safety test lead 4mm, black with gold
‑
plated
contacts, 1m
3x used for multifunction calibrator and
digital multimeter connection with the
DS-CAL test board.
8x
BNC
‑
to
‑
BNC cable, 0.5m
Used for connecting BNC UUT inputs and
DS-CAL test board.
8x
BNC
‑
to
‑
BNC cable, 1.2m
Used for connecting BNC UUT analog
DS-CAL V20-1
8/67
